What RV Owners Should Know About Flat Tow Equipment and Installation
November 16, 2026

November 16, 2026

Traveling by motorhome gives you the freedom to bring many comforts of home on the road, but driving a large RV everywhere after reaching your destination can be inconvenient. Bringing a smaller vehicle along can make errands, sightseeing, dining, and exploring easier. For many RV owners, a flat tow setup provides that flexibility without requiring a separate trailer or tow dolly.

Flat towing, sometimes called dinghy towing or four-down towing, keeps all four wheels of the towed vehicle on the road while it travels behind the motorhome. The concept sounds simple, but the complete system involves several components that must work together. Vehicle compatibility, towing capacity, base plates, tow bars, supplemental braking, wiring, safety cables, and installation all deserve attention before the first trip.

Confirm That Your Vehicle Can Be Towed Four-Down

Not every car, SUV, Jeep, or truck is designed to be towed with all four wheels on the ground. Drivetrain and transmission designs vary, and compatibility can even change between model years. Assuming a vehicle is towable because a similar model was used in the past can lead to mechanical damage.

Start with the owner's manual for the exact year, make, model, drivetrain, and transmission. Look for the manufacturer's recreational towing instructions and required procedures. Some vehicles may need a particular transfer-case position, ignition setting, battery procedure, or other preparation. Others may not be approved for four-down towing at all.

At Truck Accessories of Oklahoma, we evaluate towability when planning a flat tow system. Confirming compatibility first helps prevent owners from purchasing equipment that does not match the vehicle.

Match the Towed Vehicle to the Motorhome

Vehicle compatibility is only one side of the equation. The motorhome also needs appropriate towing capacity and connection equipment for the vehicle being pulled. Ratings for the motorhome, hitch, tow bar, and related components should be considered together rather than treating any single rating as the complete answer.

Weight matters because the motorhome must control the combined setup while accelerating, turning, descending grades, and stopping. Owners should know the relevant vehicle weights and follow manufacturer limits for both the RV and towing equipment. Accessories and cargo may also affect actual operating weight.

A professional review can help identify mismatched components before installation. A well-planned flat tow system starts with equipment selected for the specific motorhome and vehicle combination rather than a one-size-fits-all package.

Understand the Role of the Base Plate

The base plate creates attachment points on the front of the towed vehicle for the tow bar. Because vehicle frames, bumper structures, sensors, and front-end designs differ, base plates are typically designed for specific applications. Choosing the correct fit is essential to creating a secure structural connection.

Installation may require access behind exterior panels or other front-end components. Mounting points, hardware, torque specifications, and clearances must correspond with the vehicle and the base-plate manufacturer's instructions. Many modern systems also use removable attachment tabs to help preserve the vehicle's normal appearance between trips.

Select a Tow Bar That Matches the Complete Setup

The tow bar forms the primary connection between the motorhome and the towed vehicle. Different designs offer different weight ratings, mounting arrangements, storage methods, and connection features. The appropriate choice depends on the RV, the vehicle, the base plate, and how frequently the owner expects to connect and disconnect.

Tow-bar height is also important. The connection should be set up within the equipment manufacturer's specifications so the system remains properly aligned during travel. Depending on the difference between the motorhome receiver and vehicle attachment points, a compatible rise or drop receiver may be needed.

Include Supplemental Braking in the Plan

A towed vehicle adds weight behind the motorhome, and that weight needs to be considered during braking. Supplemental braking systems are designed to apply the brakes in the towed vehicle instead of asking the motorhome to handle the stopping force alone.

Requirements can vary depending on where you travel, the weight of the towed vehicle, and applicable laws, so RV owners should confirm the rules for their route and equipment. Even beyond compliance, braking should be viewed as part of the complete towing arrangement rather than an afterthought.

Different supplemental braking designs operate in different ways. The right system should be compatible with the motorhome and towed vehicle and installed according to manufacturer requirements. At our Oklahoma City shop, we integrate braking and safety controls with the rest of the towing setup.

Connect the Lighting and Electrical Systems Properly

Drivers behind the motorhome need to see when the combination is braking, turning, or traveling at night. That means the towed vehicle needs an appropriate lighting arrangement that communicates the motorhome's signals.

There are multiple ways to create that connection, depending on the vehicle and equipment. Some systems integrate with the vehicle's existing lights, while other arrangements use separate lighting. The goal is a reliable setup that provides clear brake, turn, and running-light signals without creating unnecessary electrical problems.

Add the Safety Equipment That Completes the System

The main tow bar is only part of a complete towing connection. Safety cables provide a secondary connection between the RV and the vehicle if a primary component becomes disconnected. Other accessories may include locking pins, electrical cables, breakaway components, and protection from road debris.

Before each trip, owners should know how the individual pieces connect and what should be inspected. A basic pre-travel check can include:

  • Tow bar: Confirm that the arms, pins, and locking points are fully connected according to the manufacturer's instructions.
  • Safety cables: Check that both cables are attached correctly and are clear of dragging or binding.
  • Lighting: Test brake lights, turn signals, and running lights before entering traffic.
  • Braking system: Verify that the supplemental braking equipment is connected and ready for operation.
  • Towed vehicle: Complete the manufacturer's required transmission, steering, ignition, or transfer-case procedure before departure.

Choose Professional Installation for Integrated Equipment

Each component may have its own instructions, but the larger challenge is making the entire system work as one coordinated setup. The base plate has to match the vehicle. The tow bar must connect correctly and operate within its ratings. Wiring needs to communicate lighting signals. Supplemental braking and safety equipment need secure, compatible connections.

This is why professional installation can be valuable for an RV owner who wants a dependable flat tow arrangement. Proper installation also helps avoid improvised mounting, incompatible parts, or electrical shortcuts that can create problems later.

Truck Accessories of Oklahoma installs the accessories we sell and offers specialized towing equipment from established manufacturers. Our team has more than 12 years of industry experience, and our work is backed by warranties that correspond with the products and installation services we provide.

Plan the Setup Around How You Actually Travel

According to the RV Industry Association, approximately 342,220 recreational vehicles were shipped to dealers nationwide in 2025, reflecting continued activity in the RV industry. For motorhome owners who want a smaller vehicle available at their destination, choosing the right towing equipment can make travel more flexible.

Think about the destinations you frequent, how often you disconnect the vehicle, the type of vehicle you want to bring, and the amount of equipment you are comfortable handling at a campsite. Those practical details can influence tow-bar style, accessory choices, and other parts of the system.

Build a Complete Towing System Before Your Next Trip

A safe and convenient four-down towing arrangement depends on more than buying a tow bar. Vehicle compatibility, motorhome capacity, base plates, supplemental braking, electrical connections, safety cables, alignment, and professional installation all work together. Evaluating the complete system before hitting the road can help protect both vehicles and make setup easier at each destination.

If you are preparing your motorhome and secondary vehicle for a flat tow in Oklahoma City, Truck Accessories of Oklahoma can help you choose and install a complete system. Our team offers tow bars, custom base plates, braking and safety controls, electrical connections, hitches, and towing accessories from trusted manufacturers. Contact Truck Accessories of Oklahoma to discuss your RV and vehicle combination and build a towing setup designed for safer, more convenient travel.


lift kit
November 4, 2026
Upgrade your pickup with a lift kit and practical accessories from Truck Accessories of Oklahoma. Explore your options and contact us to customize your truck.
truck accessories
November 3, 2026
Truck Accessories of Oklahoma shares essential truck accessories that improve durability, storage, towing, off-road performance, and everyday versatility.
lift kit
October 24, 2026
Thinking about raising your truck's stance? Learn how a lift kit impacts handling, steering, and off-road power so you can transform your ride with confidence!
Show More →